QUADCOPTER COMBO DIY KIT (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX)


QUADCOPTER COMBO DIY KIT (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX)

(2 customer reviews)


Add to Wishlist
Add to Wishlist


Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB

Every quadcopter or other multirotor aircraft needs a frame to house all the other components. Things to consider here are weight, size, and materials. This Q450 QUADCOPTER FRAME is a well thought out 450mm quad frame built from quality materials. The main frame is glass fiber while the arms are constructed of ultra-durable polyamide nylon. This version 3 of the Q450 QUADCOPTER FRAME features integrated PCB connections for direct soldering of your ESCs. This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy. V3 also comes with stronger molded arms over V1 and V2, so no more arm breakage at the motor mounts on a hard landing.


A2212/10T/13T 1000kv Brushless Motor With Soldered Connector

The motors have an obvious purpose: to spin the propellers. There are many motors available on the suitable for quadcopters, and this A2212/10T/13T 1000KV BRUSHLESS MOTOR WITH SOLDERED CONNECTOR is one of them which is included in this kit. Motors are rated by kilovolts, and the higher the kV rating, the faster the motor spins at a constant voltage. The A2212/10T/13T 1000KV BRUSHLESS MOTOR WITH SOLDERED CONNECTOR motor for the airplane aircraft quadcopter. A2212 / 13T 1000KV BRUSHLESS MOTOR OUTRUNNER with 80% maximum efficiency, 4-10A max efficiency current, and 12A / 60s current capacity.


1045(10×4.5) SF Props 1CW+1CCW-1Pair Black

A quadcopter has four propellers, two “normal” propellers that spin counter-clockwise, and two “pusher” propellers that spin clockwise. 1045(10×4.5) SF Props are high-quality propellers specially designed for multi-copters. 1045(10×4.5) SF Props has 15-degree angle design at the end of the propeller to avoid whirlpool multi-copter flying. The 1045 (10×4.5) SF Props are light in weight and have high strength propellers. These props have lightweight, to help improve the air-powered efficiency and aerofoil stabil

SimonK 30A BLDC ESC Electronic Speed Controller

The electronic speed control, or ESC, is what tells the motors how fast to spin at any given time. You need four ESCs for a quadcopter, one connected to each motor. The ESCs are then connected directly to the battery. SIMONK 30A BLDC ESC ELECTRONIC SPEED CONTROLLER is specifically made for quadcopters and multi-rotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs. SIMONK 30A BLDC ESC ELECTRONIC SPEED CONTROLLER can drive motors which consume up to 30A current. It works on 2S-3S LiPo batteries. It has an onboard BEC which provides regulated 5V(2A max draw) to power the flight controller and other onboard modules. It can be used to control our brushless motors with a 2S-3S LiPo(make sure motor doesn’t draw more than 30A). This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv,2200kv)

KK 2.1.5  Multicopter Flight Controller  Upgraded Built-in Compass for FPV RC Drone Aircraft

The flight control board is the ‘brain’ of the quadcopter. It houses the sensors such as gyroscopes and accelerometers that determine how fast each of the quadcopter’s motors spin. Flight control boards range from simple to highly complex. KK2.1.5 Multicopter Flight Controller Upgraded Built-in Compass for FPV RC Drone Aircraft is the new KK2.1.5 flight controller. The sensors are exactly the same as the  flight controller, however, this has the option to use the built-in compass, or external compass via a jumper.

ThE KK2.1.5 Multicopter Flight Controller is a complete open source autopilot system and the bestselling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.

CT6B FlySky 2.4Ghz 6CH Transmitter w/FS-R6B Receiver Mode 2

The radio transmitter and receiver allow you to control the quadcopter. but you will need at least four channels for a basic quadcopter. We recommend using a radio with 6 channels, so there is more flexibility.

CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is the popular 6 Channel Radio CT6B manufactured by FlySky. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels.

CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER radio is a value for money, entry level 6 channel transmitter, ideal for quadcopters and multi-copters that require the 6ch operation. This radio has two retract switches and proportional flap dials in easy reach for channels 5 and 6.

It can be powered by 8 x AA Size Batteries or a 12V Power Supply. It comes with a trainer port to help beginners learn flying.It can be configured by connecting it to the computer. Use the T6config software to configure your radio on a compute

Additional information

Weight 1000 g

2 reviews for QUADCOPTER COMBO DIY KIT (Motor + ESC + Propeller + Flight Controller + Frame + TX-RX)

  1. Ronit

    I got this in 8000 rs i cant believe, though i haven’t checked yet, looks great

  2. Jaspreet

    This quadcopter kit is good, very low price.. everything works fine, I recommend

Add a review

Your email address will not be published. Required fields are marked *

Close Menu